cancel
Showing results for 
Search instead for 
Did you mean: 

cpqscsi.ham

 
Ayman Altounji
Valued Contributor

cpqscsi.ham

I have installed a COMPAQ DLT 20/40 Tape Drive connected to slot=1 on the processor board. In Netware startup.ncf I am loading cpqscsi.ham, cpqarray.ham. Cpqscsi.ham cannot find a device and unloads. Without this driver I am unable to load Arcserve 66it.
1 REPLY
Ayman Altounji
Valued Contributor

Re: cpqscsi.ham

You'll need to NWASPI.CDM after CPQSCSI.HAM and before loading the Arcserve driver .