cpuinfo Proliant 380 g4

[cpuinfo in HP ProLiant]

We´ve executed al cat /proc/cpuinfo in a HP Prolian 380 G4 with 2 processors dualcore 3.60 GHz under OS Suse LES.

Strangely, this is the log we got:

processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.60GHz
stepping : 10
cpu MHz : 2800.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl est tm2 cid cx16 xtpr lahf_lm
bogomips : 7211.31

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.60GHz
stepping : 10
cpu MHz : 2800.000
cache size : 2048 KB
physical id : 3
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl est tm2 cid cx16 xtpr lahf_lm
bogomips : 7218.30

processor : 2
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.60GHz
stepping : 10
cpu MHz : 2800.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl est tm2 cid cx16 xtpr lahf_lm
bogomips : 7200.65

processor : 3
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.60GHz
stepping : 10
cpu MHz : 2800.000
cache size : 2048 KB
physical id : 3
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl est tm2 cid cx16 xtpr lahf_lm
bogomips : 7200.89




I don´t understand, why the "cpuinfo" identifies 4 processors single core instead 2 processors dual core, as it should really be?

Appretiated!

[Shan Sunny]

Hi,
Almost all Operating systems including Suse Linux will detect dual core CPUs as seperate CPUs. This output is normal nothing to worry.

Regards,
Shan

[.•´¯`•.¸¸. ><((((º>]

Confirmed!

[asqwq]

hi
its not amporatant
os detected every one of core
if you have one quad core cpu .os detected four cpu.
best regards

[cpuinfo in HP ProLiant]

Thanks a lot guys!!

[John Dongworth]

The Guys who have replied so far are all correct, its HyperThreading on a G4 though, not separated cores (the G4 didnt use procs with 'true' seperate cores)

Id be a little more worried about the fact that the CPUs are reported as being:

model name : Intel(R) Xeon(TM) CPU 3.60GHz

but are not running full speed:

cpu MHz : 2800.000

Not played with SLES for a LONG time, so couldnt say for certain, but I'd definitely check to see if it is doing some speed-stepping type operation to power save on the server....looks like you aren't running it at full speed...

You can switch off HT in the BIOS if you want BTW...then you will just see 2 CPUs....

thanks

Dongers

[asqwq]

hi cpuinfo in HP ProLiant 380 g4

dont forget assign point to answere

best regards