HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

creating and restoring ghost image

 
Marco Boonstra
Occasional Contributor

creating and restoring ghost image

we have created an image using ghostcasting 9.0. on a DL360 G4p. It has 2 36Gb disk in a raid 1+0 level. it has a single partition with win2003 installed on it.

the goal is to restore the image to 2x 72Gb raid 1+0.

after a succesfull restore (according to ghost), we booted the server and we got an MBR error??
How is this possible?

i tried fixing the problem with fdisk /mbr but it didnt resolve the problem.

has it anything to do with the disks or the raid level??

kan it be a hardware problem?

i am now trying tot restore the partition to 2 other 36 Gb disk, to check wat is the problem but please assist with advise.
2 REPLIES
Mike Patty
Occasional Advisor

Re: creating and restoring ghost image

We tried to use Norton Ghost on a Windows 2000 system and basically had the same problem. Symantec has another product called LiveState Recovery for use with 2000/2003 OS. We bougth the Suite and it works great. I hope this helps.
Avi Milbaum
Occasional Advisor

Re: creating and restoring ghost image

try to restore when you connect one disk
and tell to ghost to restore disk0 partition0