disc's drivers for a HP Proliant DL380 G5

[Carme Torca]

Hi,

Does anyone could help me?
I need to download the disc's drivers for one HP Proliant DL380 G5.
Where can I download them?

Thanks a lot of!
Carmen.

[Matti_Kurkela]

The standard way to find drivers for HP products:

http://www.hp.com/go/support

Select "Download drivers and software (and firmware)".

Type to the product field: "Proliant DL380 G5" and press Enter.

If there are multiple matches, the next page will ask you to pick the correct one.

Then select the operating system you're downloading drivers for. You can also select the language version at this point.

The next page will list all the drivers that may be required by your chosen combination of server+OS.

MK

[David Claypool]

If you're installing Windows Server 2003, it supports the Virtual Install Disk. Enable Virtual Install Disk from the ROM-Based Setup Utility with [F9] during boot. Then, during installation, you won't need to supply a floppy to provide a disk driver--WS03 will get it from the BIOS. This is not a high-performance driver, so you should apply the ProLiant Support Pack after installation.

Alternatively, if you were to use SmartStart, this all would be automatic. Similarly, using the Rapid Deployment Pack would eliminate those manual steps, also.

[Carme Torca]

Hi,

I need to install hp smart array P400 drivers to install one solaris 10 x86.

I have download one software
CPQary3-1.71-solaris10-i386.tar.gz, but I don't know if it is correct, because the system don't reconize the cd.

Could you help me??

Thanks a lot of!
Carmen.

[Mi6t0]

How do you point to them? Floppy? Try with USB-stick ot maybe if you have an advanced ilo-license, you can try through ilo.

[Carme Torca]

Hi,

No, I had done a du cd-rom with th CPQary3.iso, and the server doesn't reconice the CD.

Is it the correct driver?? How can I install it??

Thanks!
Carmen.

[Mi6t0]

Are you completely sure that the CD is bootable? Try it on another workstation