cancel
Showing results for 
Search instead for 
Did you mean: 

diskette boot

 
philenmer
Occasional Visitor

diskette boot

Hi,

I have a proliant DL360 server.

I would like boot on a diskette but i don't find option on setup to boot on a diskette.

Can you give the solution to configure the setup to start on a DOS diskette ?

Thank's a lot.

Phil
1 REPLY
Marc Carney
Valued Contributor

Re: diskette boot

Assuming that your DL360 does not have a hardware fault, try this:

You normally have two options to set this up. Press F10 on startup and change the boot order so that it looks for a floppy disk to boot from before moving on to whatever is next in the list. Alternatively you may be given the option of pressing F9 to select your boot device during start up.

Hope this helps.

Marc
The sheep tell me what I need to know