cancel
Showing results for 
Search instead for 
Did you mean: 

dl360 g3

 
Neil_30
Occasional Contributor

dl360 g3

hope someone can help with this.

I have a dl360 g3 when running post just after the f8 option for the array configeration option we expect to get f8 again to get to ilo configeration screen but instead I get the message ilo Temporarily unavailable (1).

I have rompaq the server also set switch 1 to on to overight security also switch 6 to reset system config. also ran system erase from smartstart 6.2, also went into f9 on boot cleared system comfig from there.

would be greatfull for any advice.