cancel
Showing results for 
Search instead for 
Did you mean: 

dl360 g6

ess
Super Advisor

dl360 g6

hi all
i have one dl360g6.but when the system boot in post i see not detect smart array and when login the rom base setup i see disable to smart array.
i switch to enable and save but when the reset the server and boot i see not detect smart array and in rom base see the disable smart array.
i have update and erase the server but not resolve problem.
please help my.
tanks.
7 REPLIES
Johan Guldmyr
Honored Contributor

Re: dl360 g6

What is the name of what it sees? P410?

Looks like on the dl360 g6 there are only the p410i so you may not be able to reseat the controller card, but maybe you can reseat the cables?
ess
Super Advisor

Re: dl360 g6

hi
p410i in server.
Suman_1978
HPE Pro

Re: dl360 g6

Hi,

What is the exact message you see during POST regarding P410i?

Does the server give any 17xx series error message?

I would say, remove any cache module and BBWC if installed and check if P410i works.

Thanks
Torsten.
Acclaimed Contributor

Re: dl360 g6

Did you press "any" key in order to see POST messages?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ess
Super Advisor

Re: dl360 g6

hi
tanks for help
in the post not show any error only in the setup not save enable smart array.
i remove the cache battery but not useful.
Johan Guldmyr
Honored Contributor

Re: dl360 g6

"only in the setup not save enable smart array"

can you please clarify?

also, did you try to remove the cache-module (dimm).
ess
Super Advisor

Re: dl360 g6

hi
tanks for help
yes.only not save in setup and not detect in the post.
yes.i remove the cache battery but not solve the problem.