HPE Community
ProLiant Servers (ML,DL,SL)
1753500 Members
3405 Online
108794 Solutions
New Discussion

Re: dl360g3 boot problem

 
jon_192
Occasional Contributor

‎01-20-2005 05:46 AM

‎01-20-2005 05:46 AM

dl360g3 boot problem

Never had this happen before: we have installed Windows 2003 on a dl360g3 via Rapid Deplyment Pack, and via regular install CD. When the server reboots [and should boot into windows for the first time], we get a 'non system disk or disk error', as if nothing has been installed at all.

we have tried this with 1x36GB RAID0 and 2x36GB RAID1 logical drives.

The server has the SA5i selected as the boot controller.

the array diagnostics utillity [from SS7.1CD] does not report any errors.

if we press F10 durring post, the on-board diagnostics show the ntfs partition and identify it as the boot partition.

Does anyone have an idea about what might be wrong?
0 Kudos
Reply
1 REPLY 1
jon_192
Occasional Contributor

‎01-20-2005 06:27 AM

‎01-20-2005 06:27 AM

Re: dl360g3 boot problem

we upgraded the 5i firmware and it works now...
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.