HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

dl380g4 and connecting an library to i6

Go to solution

dl380g4 and connecting an library to i6


for the internal drives I use an SA6400. At the external SA61-port I want to connect a Quantum DLT Library. This Library uses SCSI-ID 4 with LUN 0 and 1.
Within W2K3 I can only see the drive at ID4 LUN 0 but not the roboter at ID4 and LUN 1.
Is the 6i not capable in handling LUN's ?
Does someone have a solution for me ?

Thanks in advance
Andrzej Kowalik
Honored Contributor

Re: dl380g4 and connecting an library to i6

6i not support connecting any automated backup devices, stand alone tape drives only.
5i is/was supported with SSL1016 Ultrium 460, 1/8 Ultrium 460, 1/8 SDLT320, and 1/8 Ultrium 230 tape autoloaders, but does not support devices with multiple LUNs behind a single SCSI ID.