HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

dl385 raid config

 
SOLVED
Go to solution
kevin poole_1
Frequent Advisor

dl385 raid config

I have two raid cards installed in a dl385. a p600 and a p200. I need to set up a raid 0 for the o/s and raid 5 for the remaining drives with an online hot swap. The cables coming from the data backplane control four drives each. How can i get one card to control two drives and the other to control the remaining drives.I have tried to do it in the smart array config tool and it does not want to see anything else than the four drives. Any suggestions? Thanks for the help.
1 REPLY
Gus Kwong
Respected Contributor
Solution

Re: dl385 raid config

The SAS controllers actually have point-to-point connection to all the disk drives on the DL385g2. So the traditional 2+4 SCSI channels no longer exist on the SAS/SATA models.
Learning never ends