ProLiant Servers (ML,DL,SL)
1748052 Members
4650 Online
108758 Solutions
New Discussion

dynamic power management/fan noise

 
Gijsen_1
New Member

dynamic power management/fan noise

Using a Proliant ML350 G5 with 2 Intel Xeon 3G, ROM version 2.1: upon booting
the following message shows:
"Warning: Demand based power management cannot be supported with the following
Processor configuration. The system will run in Full Performance mode."

The bios is set to (power governor): Dynamic Power savings mode (auto)

As this is a warning the booting continues and windows starts up both the
server is rather noisy.
The support forums mention a cpqhealth driver that is supposed to handle this
issue but nowhere is mentioned where to get this driver for windows server 2003.
Or is there any other way to quiet down the server (its running full throttle
now)?