ProLiant Servers (ML,DL,SL)
1748122 Members
3290 Online
108758 Solutions
New Discussion юеВ

Re: error message at smart array 6i

 

error message at smart array 6i

hi ,
i have server DL 380 g3 ,using 2 hdisk ,one hdisk failed, after replace same hdisk and finish rebuild , the led hdisk amber again,when i look at using ACU,the display error message is :
status : predictive failure
action : replace S.M.A.R.T drive ,

please advise....

thx
hen
6 REPLIES 6
V├нctor Cesp├│n
Honored Contributor

Re: error message at smart array 6i

This means that the drive has been reporting errors and the controller recommends it's replacement.

You should run an ADU report to see what errors it has reported.

Re: error message at smart array 6i

Hi vcespon
I look with ADU , the solution is replace the disk , i replace again with new hdisk , after rebuild , the error message show again with same problem.
please advise....

thx
Hen
V├нctor Cesp├│n
Honored Contributor

Re: error message at smart array 6i

Can you attach the full ADU report?

From that screenshot it's clear that the controller is seeing the Port 2, ID 1 as bad.

Prokopets
Respected Contributor

Re: error message at smart array 6i

Hi!
It may be a controller error. Have you tried to upgrade a firmware?

Regards,
Philipp.
Jan Soska
Honored Contributor

Re: error message at smart array 6i

hello all,
anyway it look replacing the treve is highly recomnded.

Jan

Re: error message at smart array 6i

Hi all ,
the case close...with using new drive at disk o and old drive at disk 1 after that i'm install again the windows.

thx all

Hen