ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

fail to install RHAS 3 on BL20p blade

 
ecorban
Frequent Advisor

fail to install RHAS 3 on BL20p blade

HI

were trying to install RHAS 3.o on a bl20p
G3 blade but the rhas isntall process fails to find the Hard disk 36.4 GB 15k RPM witde ultra320 scsi drive. after it triesto load the cciss driver, it sends a warning :
"No hard drive have been found. you probably need to choose device drivers for the installation to succeed. would you like to select drivers now ?".

my questions are wqhats the problem here ? what drivers do i need to install extra to this.

we also installed the following and it did not
fix the problem

Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant BL20p G3 (I08) Server
version 4.02 I08-12/02/2004 (12 Jan 05)

Has anybody seen this before ? If so how do i fix this ?
2 REPLIES
David Claypool
Honored Contributor

Re: fail to install RHAS 3 on BL20p blade

Make sure you are installing from RHEL3 U4. That is the first version that came with drivers to support the SmartArray 6i. Alternatively, build a driver disk from http://www.hp.com/servers/swdrivers
Rob Leadbeater
Honored Contributor

Re: fail to install RHAS 3 on BL20p blade

Hi,

The correct drivers for the 6i controller are also included on Update 3 of RHEL 3.0

Depending on what you're running on your server you may not want to use Update 4...

Regards,

Rob