ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

gathering system info at command line runnin linux

Bill Gunter
Occasional Contributor

gathering system info at command line runnin linux

I would like to be able to gather info, e.g. serial number, product name, from the command line on a DL360-G3. I've installed the hpasm rpm for redhat 7.3 and the web interface works fine, but I need to gather the same info using a script for auditing purposes.

Any advice?

Thanks.

Bill
1 REPLY
Thilo Knoch
Frequent Advisor

Re: gathering system info at command line runnin linux

Not as direct as an /proc entry, but if the web agents are running SNMP should work too.
Then you can (even remote) get the serial number via:

snmpget .1.3.6.1.4.1.232.2.2.2.1.0

where community is the IP-Address or localhost and the string found at rocommunity or rwcommunity in the /etc/snmp/snmpd.conf

.1.3.6.1.4.1.232.2.2.2.5.0 returns the serial number too,
.1.3.6.1.4.1.232.2.2.4.2.0 the machine too.

There should be a MIB documentation, but you can also find the location of further values in the output of
snmpwalk -O ne -c .1