HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

gen8 and spp 2014.09.0

 
lazarmi
Respected Contributor

gen8 and spp 2014.09.0

Hey all,

We're trying to upgrade the SPP in an automatically way by starting the hpsum in the following way:
./hpsum /romonly /silent $hpSumOptions


where $hpSumOptions can contains: "/logdir" or "-logdir" but most of the times we're not passing any other options

We can see that the hpsum command successfully ran and we got an exit status of 1(which means that needs a reboot - success reboot)

but my question, why I can't see any log files on that box. Checked /tmp/hp_sum /tmp/HPSUM, tried to force the logdir to the mount point but nothing is logged

Any advices would be appreciated

 

 

Mihai Lazar
Automate & Orchestrate Solution Architect

*If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
1 REPLY
lazarmi
Respected Contributor

Re: gen8 and spp 2014.09.0

forgot to say that we checked /var/hp/log as well - and is empty

Mihai Lazar
Automate & Orchestrate Solution Architect

*If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.