ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

hard disk & controller problem

Gabriel Bergevin
Occasional Contributor

hard disk & controller problem

I'm using compaq proliant ml330 g3 with 4 hard drives (2 x72g connected to the 64-bit/133-Mhz Dual Channel Ultra320 SCSI Adapter and 2 x 36g connected to the standard scsii control that came with the server). I configure each of them in mirror with windows 2000.

Today, My mirror was out of sync and I got this error message in the event viewer:

The device, \Device\Harddisk2\DR2, is not ready for access yet.

dmio: Harddisk2 write error at block 71169935: status 0xc000009d

The device, \Device\Scsi\symmpi1, did not respond within the timeout period.

dmio: write error on Plex Volume3-01 of volume Volume3 offset 71169872 length 72

dmio: Plex Volume3-01 detached from volume Volume3

dmio: Disk2-01 Subdisk detached from volume Volume3-01

Application popup: Windows - FT Orphaning : A disk that is part of a fault-tolerant volume can no longer be accessed.

I restart the mirror and it work properly. Can you please help me on that !