hard disk replacement / cloning in raid 1

[robfra]

Hi, i need to know to clone and replace 2 hard drives configured in raid 1 in an HP Proliant ml 110 Gen 9 server with larger ones.

Thanks

[SanjeevGoyal]

Hello,

(Redundant Array of Independent Disks Mode 1)

A popular disk or solid state drive (SSD) subsystem that increases safety by writing the same data on two drives. Called "mirroring," RAID 1 does not increase performance.

However, if one drive fails, the second drive is used, and the failed drive is manually replaced. After replacement, the RAID controller duplicates the contents of the working drive onto the new one

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

[robfra]

Thanks for your answer. but if I insert a different capacity hard disk, the raid is rebuilt anyway?

[Smartin67]

Try the software found here for cloning your server hard drives. I have personally used this, and it works really well.

https://www.easeus.com/backup-utility/clone-server-2000-hard-drive.html

[SanjeevGoyal]

Hello,

Please let me know if you have any quires.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,