ProLiant Servers (ML,DL,SL)

help decoding system power fault

 
billyburly
New Member

help decoding system power fault

Can anyone help me decode the following error? It prevents my DL 380p gen8 from starting. Found the following error in the IML

System Power Fault Detected (XR: 24 00 MID: FF 0D FC CE C0 FF FF 2C 2C 0C 0C 00 8A 30 00 01 03 67 00 00 00 00 00 00 00 00 00 00 00 00 00 00)
2 REPLIES 2
Ihaqueit
Trusted Contributor

Re: help decoding system power fault

Try to start with minimal configuration, if its not work, detach the backplane from the motherboard.

I Haq
sudhirsingh
HPE Pro

Re: help decoding system power fault

@billyburly 

It appears to be SAS Backplane/ CPU2 fault.

Try  to remove these two compoents from the server and then power on the server,

Further install one component at a time and power on the server to check and isolate the faulty part.

Hope this helps!

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo