ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

hitsink temperature of chipset getinng high in ML150 g5

 
Lokman_csl
Occasional Contributor

hitsink temperature of chipset getinng high in ML150 g5

Hi,
I got problem with ML 150 G5. Its getting unexpected shutdown. And after that when i push start button it not starting for few minute.

I found that when this server runs the temperature of hitsink on chipset get very high.

Can anybody give reason with solution ?
2 REPLIES
WhiteShadoW
Advisor

Re: hitsink temperature of chipset getinng high in ML150 g5

Power switch cable in place the problem will draw.Bu way Switch to test let might.Power. Relevant and updated firmware at the following address Controls let daemons. If tested with a different power supply let's.
Lokman_csl
Occasional Contributor

Re: hitsink temperature of chipset getinng high in ML150 g5

Hi,
Thanks for response.
I have changed the power supply.
But still the chipset hitsink temperature
is very high.
Is the systemboard faulty ?

Regards,

LOKMAN_CSL