ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

hp 64 bit/133-MHz PCI-X dual channel ultra320 hba

 
Sébastien Quesnel
Occasional Contributor

hp 64 bit/133-MHz PCI-X dual channel ultra320 hba

I replace the 5i controller in a ProLiant DL380 G3 with the hp 64 bit/133-MHz PCI-X dual channel ultra320 hba. How can i configure my array ? The SmartStart CD does not detect my controller and i can't use ORCA because it detect only the 5i controller.
1 REPLY

Re: hp 64 bit/133-MHz PCI-X dual channel ultra320 hba

This controller is NOT an array controller. It is a standard stand-alone SCSI controller. You can configure this controller in the ROM Based Setup Utility (RBSU) by pressing F9 at the end of the POST process. Make sure to set this as your boot controller and you should have no problems.

On a personal note - I would send that controller back and get a SA641. The SA641 is an Array controller and supports U320.