hp array configuration utility not working

[john salow]

We have 2 servers running Windows 2003 R2 Enterprise 64 bit on dl385s running Exchange 2007. The array configuration utility no longer works. I am suspecting Exchange 2007 Rollup 4 that was recently installed as the array utility still works on the other 64 bit machines. Can anyone confirm this problem with a similar configuration?

[KarloChacon]

hi

what do you mean by "The array configuration utility no longer works. "?

what is happening when you open the Array configuration utility (ACU)? an error? ACU is not loading? or what?

have you tried the latest version?

http://h18023.www1.hp.com/support/files/server/us/download/27533.html

let us know

regards

[john salow]

yes I'm using the latest version and have installed all the latest drivers from the latest firmware cd. When I try to open the array utility all I get is a blank web page. If I try to access through System Management none of the agents display anything. With the same machine, same operating system, same updates on a machine without exchange 2007 rollup 4 - it works as expected

[KarloChacon · Accepted solution]

hi

I had this issue too

check this customer advisory
http://urlao.com/smhptimeout

- check SMHP logs
- check if SNMP is properly configure

also take a look of this thread same issue
http://urlao.com/smhpthreah

I hope this can help you

regards

[chongkan]

"You use Microsoft Update to apply Update Rollup 4 for Exchange 2007. Or, you apply the update rollup in silent mode. When you do this, certain services in Exchange Server 2007 are stopped and are disabled.
"

http://support.microsoft.com/?kbid=940006

If SNMP service is started re-install the PSP.

This should configure everything back to normal..

[john salow]

tried all suggestion and still doesn't work. Only thing I get on system management page is overall system status - no failed degraded items (which is false by the way as we have a bad drive)

[KarloChacon]

hi

- try this unistall again PSP 7.9 (remove all hp programs on Add/Remove Programs)
- Remove also SNMP
- reboot
- install and configure SNMP again
- Install PSP 7.9 again (check if you get any error or log when you install PSP)
- if the continue upload the SMHP log to check any agent is causing that so you have to inactive that agent on control Panel (Hp agents)

regards

[john salow]

uninstalled all HP agents (PSP), uninstalled SNMP, rebooted, reinstalled SNMP, reinstalled PSP 7.9 64bit, rebooted. Still nothing on system management page other than what was there before. Log shows nothing unusual.

[KarloChacon]

hi mmmm let's see

like you read on my thread I issue ws related with the NIC agent I inactivated it and SMHP worked my recommendation go to Control Panel and play with the agents I mean there are two status ACTIVE and INACTIVE try one agent at a time I think this can help you

special attention to this

1.
"
When the SMH web-based user interface begins to load, it queries all the agents for status to populate the data onto the body of the page. If any of the agents (including the Version Control Agent) are unable to communicate back within a certain timeframe, SMH will timeout the data collection process."

so according to this one agent (or more) is having issues so when SMHP queries its data
is causing this blank screen.


2.
I think because you already tried configuring SNMP, latest SHMP, HP insight agents and version control agent (which sometimes tend to fail)

just in case try install these again
HP Version Control Agent for Windows
HP System Management Homepage for Windows
HP Insight Management Agents for Windows Server 2003 x64 Editions
http://h18023.www1.hp.com/support/files/server/us/locate/1111_6065.html#71

regards

[john salow]

see attached. I tried disabling everything except array. Don't understand what you mean about configuring SNMP?