cancel
Showing results for 
Search instead for 
Did you mean: 

hp dl360g6

mm3000
Occasional Contributor

hp dl360g6

hi
my server is dl360 g6 with this config:

4gb ram (2*2 DIMM )2R*8.PC3-10600R-9-10-B0.1333.ECC

2 HARD DISK SAS 72GB 6G DP 15K

2 CPU 5550

MY OS IS WINDOWS SERVER 2003 R2 ENTERPRISE EDITION

the raid is p410i with 512mb ram and bbwc

i install os on this server in tthe first time and install mcafee and join domain this server but when want the update server server go too blue screen

i test server to 2gb ram and 8 GB RAM(4*2GB)
AND SERVER BOOT AND NOT PROBLEM BUT WHEN BOOT TO 4 GB RAM .SERVER AFTER APPLAYING COMPUTER SETTINGS GO TO BLUE SCREEN .

2 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: hp dl360g6

hi,

so you have one memory module per CPU ???

make HW check with the smartstart cd.

we have this server with 6 GB ram 1x cpu Windows 2008 std 64bit SP2 without any problem.

mikap

Re: hp dl360g6

Hi,

this try.
During the server startup sequence, press the F9 key to access RBSU.
System Options - Processor Options - No-Execute Memory Protection set.

Rergards.
Erdogan
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.