ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

hp-health-8.2.0-283.rhel5 not starting in HP DL 185 G5 with CentOS 5.3

Jani Ollikainen
Occasional Visitor

hp-health-8.2.0-283.rhel5 not starting in HP DL 185 G5 with CentOS 5.3

# /etc/init.d/hp-health restart
Using Proliant Standard
IPMI based 1XX System Health Monitor
Shutting down Proliant Standard
IPMI based 1XX System Health Monitor (hpasmpld): [ OK ]
Starting Proliant Standard
IPMI based 1XX System Health Monitor (hpasmpld): [ OK ]

# grep hp /var/log/messages
Apr 21 15:25:54 s hpasmpld[10032]: Duplicate Entity(00)/Instance(00) detected between Sensor 31 & Sensor 33
Apr 21 15:25:54 s hpasmpld[10032]: Cannot parse repository - monitoring disabled
Apr 21 15:25:54 s hpasmpld[10032]: Not able to initialize data structures!

# uname -a
Linux s 2.6.18-128.1.6.el5 #1 SMP Wed Apr 1 09:10:25 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux

# ipmitool mc info
Device ID : 18
Device Revision : 1
Firmware Revision : 3.5
IPMI Version : 2.0
Manufacturer ID : 11
Manufacturer Name : Hewlett-Packard
Product ID : 8193 (0x2001)
Product Name : Unknown (0x2001)
Device Available : yes
Provides Device SDRs : no
Additional Device Support :
Sensor Device
SDR Repository Device
SEL Device
FRU Inventory Device
IPMB Event Receiver
Bridge
Chassis Device
Aux Firmware Rev Info :
0x00
0x00
0x00
0x00

.. Any ideas?
3 REPLIES
Jani Ollikainen
Occasional Visitor

Re: hp-health-8.2.0-283.rhel5 not starting in HP DL 185 G5 with CentOS 5.3

Oh, Maybe this sensor list would somehow help:

# ipmitool sensor
POST Error | 0x1 | discrete | 0x0180| na | na | na
| na | na | na
Memory ECC | na | discrete | na | na | na | na
| na | na | na
ACPI State | 0x1 | discrete | 0x0180| na | na | na
| na | na | na
System Reset | 0x0 | discrete | 0x0080| na | na | na
| na | na | na
SYSTEM FAN 1 | 12531.328 | RPM | ok | na | inf | na
| na | 1000.400 | na
SYSTEM FAN 2 | 11904.762 | RPM | ok | na | inf | na
| na | 1000.400 | na
SYSTEM FAN 3 | 12531.328 | RPM | ok | na | inf | na
| na | 1000.400 | na
SYSTEM FAN 4 | 11904.762 | RPM | ok | na | inf | na
| na | 1000.400 | na
Rear HDD Opt Fan | na | RPM | na | na | inf | na
| na | 1000.400 | na
System 12V | 12.040 | Volts | ok | na | na | na
| na | na | na
System 5V | 5.101 | Volts | ok | na | na | na
| na | na | na
System AUX 5V | 5.101 | Volts | ok | na | na | na
| na | na | na
System 3.3V | 3.342 | Volts | ok | na | na | na
| na | na | na
System AUX 3.3V | 3.342 | Volts | ok | na | na | na
| na | na | na
CPU0 Vcore | 1.098 | Volts | ok | na | na | na
| na | na | na
CPU1 Vcore | 1.049 | Volts | ok | na | na | na
| na | na | na
CPU0 Mem Vcore | 1.784 | Volts | ok | na | na | na
| na | na | na
CPU1 Mem Vcore | 1.784 | Volts | ok | na | na | na
| na | na | na
CPU0 MEM VTT | 0.921 | Volts | ok | na | na | na
| na | na | na
CPU1 MEM VTT | 0.921 | Volts | ok | na | na | na
| na | na | na
NB SB Vcore | 1.215 | Volts | ok | na | na | na
| na | na | na
CPU0 Diode | 29.500 | degrees C | ok | na | na | na
| 80.000 | 85.000 | na
CPU1 Diode | 37.000 | degrees C | ok | na | na | na
| 80.000 | 85.000 | na
Power Ambient | 29.000 | degrees C | ok | na | na | na
| 80.000 | 85.000 | na
Front Panel Temp | 30.000 | degrees C | ok | na | na | na
| 80.000 | 85.000 | na
Therm-Trip0 | 0x0 | discrete | 0x0180| na | na | na
| na | na | na
CPU0 Prochot | 0x0 | discrete | 0x0180| na | na | na
| na | na | na
CPU1 Prochot | 0x0 | discrete | 0x0180| na | na | na
| na | na | na
CPU Socket 0 | 0x1 | discrete | 0x0280| na | na | na
| na | na | na
CPU Socket 1 | 0x1 | discrete | 0x0280| na | na | na
| na | na | na
PS1 Present | 0x1 | discrete | 0x0280| na | na | na
| na | na | na
PS2 Present | 0x0 | discrete | 0x0180| na | na | na
| na | na | na
PS1 Status | 0x0 | discrete | 0x0180| na | na | na
| na | na | na
PS2 Status | na | discrete | na | na | na | na
| na | na | na
Red PS Present | 0x1 | discrete | 0x0280| na | na | na
| na | na | na
PS Redundancy | 0x0 | discrete | 0x0280| na | na | na
| na | na | na
Identify | 0x0 | discrete | 0x0180| na | na | na
| na | na | na
Watchdog | na | discrete | na | na | na | na
| na | na | na

It would be nice to get hp-health running because the fans are doing 12k.

Or any other ideas to get fans go slower?
Magnus Martensson
Occasional Visitor

Re: hp-health-8.2.0-283.rhel5 not starting in HP DL 185 G5 with CentOS 5.3

Hi Jani,

just ran into the very same problem as you.
Did you ever manage to solve it, and how?

Kind regards,

Magnus
Jani Ollikainen
Occasional Visitor

Re: hp-health-8.2.0-283.rhel5 not starting in HP DL 185 G5 with CentOS 5.3

Hi,

Unfortunately no.

Tested with hp-health-8.2.5-50.rhel5, result is even more Dup Entity's.

Aug 18 13:09:55 localhost kernel: ipmi message handler version 39.0
Aug 18 13:09:55 localhost kernel: ipmi device interface
Aug 18 13:09:56 localhost kernel: IPMI System Interface driver.
Aug 18 13:09:56 localhost kernel: ipmi_si: Trying SMBIOS-specified KCS state machine at I/O address 0xca2, slave address 0x20, irq 0
Aug 18 13:09:56 localhost kernel: ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x2001, dev_id: 0x12)
Aug 18 13:09:56 localhost kernel: IPMI KCS interface initialized
Aug 18 13:09:56 localhost kernel: ipmi_si: Trying ACPI-specified KCS state machine at I/O address 0xca2, slave address 0x0, irq 0
Aug 18 13:09:56 localhost kernel: ipmi_si: duplicate interface
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 31 - 33 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 31 - 34 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 32 - 34 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 31 - 35 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 32 - 35 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 33 - 35 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 31 - 24 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 32 - 24 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 33 - 24 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 34 - 24 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 35 - 24 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 31 - 2B (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 32 - 2B (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 33 - 2B (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 34 - 2B (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 35 - 2B (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(02)/(01) from 50 - 53 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(02)/(02) from 51 - 54 (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 31 - FE (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 32 - FE (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 33 - FE (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 34 - FE (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 35 - FE (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 24 - FE (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Dup Entity(00)/(00) from 2B - FE (sensor range)
Aug 18 13:09:58 localhost hpasmpld[14305]: Cannot parse repository - monitoring disabled
Aug 18 13:09:58 localhost hpasmpld[14305]: Not able to initialize data structures!