ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

hp ml150 gl server only one nic working.

Bogdan Sirbu
Occasional Visitor

hp ml150 gl server only one nic working.

After installing windows server 2003 on my proliant server and installed all the drivers from the hp site. I can only see one nic installed. The other one is not installed. And when i look into the device manager i get an unknow device. and only one nic.

What do i need to do in order to make the other nic work?

and yes i have installed all of the windows server updates.
5 REPLIES

Re: hp ml150 gl server only one nic working.

Server Generation ?
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Bogdan Sirbu
Occasional Visitor

Re: hp ml150 gl server only one nic working.

G6

Re: hp ml150 gl server only one nic working.

Hi,

Install the following all drivers for 2003 server 32bit.

HP NC-Series Broadcom 1Gb Driver for Windows Server 2003
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884323&prodNameId=3884324&swEnvOID=1005&swLang=13&mode=2&taskId=135&swItem=MTX-67ae0ea3d11b4965b20a9f774f

HP NULL IPMI Controller Driver for Windows Server 2003
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884323&prodNameId=3884324&swEnvOID=1005&swLang=13&mode=2&taskId=135&swItem=MTX-1b0c0013e1b2496fa19a184968

HP ProLiant 100-Series Management Controller Driver for Windows 2003/2008
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884323&prodNameId=3884324&swEnvOID=1005&swLang=13&mode=2&taskId=135&swItem=MTX-88c4758f65484a6a8907423981

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
masterdead
Occasional Visitor

Re: hp ml150 gl server only one nic working.

I have same error on ProLiant ML350 G3.
Same system, latest drivers, updates and firmwares.
Any ideas?
Terry Hutchings
Honored Contributor

Re: hp ml150 gl server only one nic working.

Bogdan,

I believe the same issue with the second NIC is not really an issue at all. The ML150 G6 only has a single embedded NIC. There are two RJ45 connections on the back, but one of them is used for remote management. Search for "interfaces" within the quickspecs for this server and you will find 1 NIC port and 1 Lights Out 100 port:

http://h18000.www1.hp.com/products/quickspecs/13249_na/13249_na.HTML

Masterdead,

This server only ships with one embedded NIC. This server does not have an iLO or LO 100 port either (I believe the ML350 G4p was the first to ship with an iLO). Is the second NIC you mentioned in one of the PCI slots? I have provided the link for the quickspecs for you also, so that you can look at what comes with these servers:

http://h18004.www1.hp.com/products/quickspecs/11430_na/11430_na.html
The truth is out there, but I forgot the URL..