ProLiant Servers (ML,DL,SL)
1748014 Members
4550 Online
108757 Solutions
New Discussion

Re: hp proliant ml110 g7

 
Wampek
Occasional Visitor

hp proliant ml110 g7

Hello and good day. Ive encountered problem with my hp proliant ml110 g7. One day it just stopped working.

When i start PC first it tries to start fans start to spin and after some seconds it goes off then it start again fans spinning again and after 5sec later the led with pulse sing lights red and pc starts beeping without any pause and fans still spining...i tried changing PCU ,RAM , PSU with no change.

So could you please suggest some solutions to my problem? Thank you very much.

1 REPLY 1
KK
HPE Pro

Re: hp proliant ml110 g7

Hi,

From the post, it seems basic troubleshooting was carried out.

Please remove any PCI cards if installed, remove additional RAM modules.

If the issue remains same, it could be with system board or temperature sensor cable.

If you have carepack, log a support case with HPE.

For more information on server refer Maintenance and Service Guide : https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=5075942&docLocale=en_US&docId=emr_na-c02790685

I am an HPE Employee


Accept or Kudo