hp prolineml110 g6

[ihaus]

am trying to install the windows server 2003 put how I do for putting the driver raid in the installation since he/she doesn't have diskette driver, and when I proceed in the installation ta blue screen.
Did anybody already go by that?
Thankful

[Lazarix]

Download this: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3984625&prodNameId=3984626&swEnvOID=1005&swLang=13&mode=2&taskId=135&swItem=MTX-52876a67f051432db24b4936f1

EXTRACT it to somewhere on your pc (do not install it)
You will see lots of files including a txtsetup.oem file.
copy everything except cpqsetup.exe onto a floppy.
Go to the server and start the windows installation.
Press F6 when it tells you to.
Put in the floppy
when the window comes up to specify a driver, press s
choose the RAID controller for your server and hit enter
hit enter again
when it finishes loading, press enter for windows install
f8 to accept agreement
and it should recognise the array from here.
Good luck!

[marcus1234]

ok ihaus ..

hmm disable raid in bios then install on one disk

tip easy setup cd is not for onboard sata controllers..

now in windows install the raid controller driver so we have windows with raid driver but no raid..

and raid enable din bios,..
and voila we have raid enjoy :)



This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#3