1748136 Members
3640 Online
108758 Solutions
New Discussion

Re: hp-snmp-agents

 
jabirmk
Occasional Contributor

hp-snmp-agents

Hi,

 

    We have HP Proliant DL380 G7 server running on Redhat Linux(64bit) ,I have installed hp-health and hp-snmp-agent rpms for RHEL but could not get how to get it tested(service hp- status shows it is running fine).

 

We have our own EMS system and I have configured trapdestination in snmpd.conf to our EMS server IP,earlier for SUN systems we have used ipmitool to generate test traps but that doesn't seems be working with hp-snmp-agent.So I was looking for a way to  simulate hardware traps from HP box.

 

Apart from this I would also need MIB files ,with the rpm I could only see the compiled MIB file formats.

 

Thanks in advance

Jabir

1 REPLY 1
Ali
HPE Pro

Re: hp-snmp-agents

HI Jabir,

 

 

You may Refer to page no 16 of Managing ProLiant servers with Linux guide for SNMP agent configuration and testing.

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01632137/c01632137.pdf

 

 

HP Insight management agent MIBs is available to download from the following link:

http://h18013.www1.hp.com/products/servers/management/hpsim/mibkit.html

 

Was the post useful? Click on the white KUDOS! Star.
For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

 

Let me know if you need more/specific information about SNMP configuration.

 

Thanks,

Aftab

I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base – Just a Click Away!
See Self Help Post for more details

Accept or Kudo