hpqmgmt flooding event log

[rudokop]

Hello, recently hpqmgmt started to flood my system event log with the message: "Sensor 11 is missing. Reading Flags = 40 ".
I've tryed to google it but no luck at all.
Is there any solution to this situation?

[kris rombauts]

if you perform an update to :


- your ILO firmware to v1.78
- the system mgmt driver to v1.11.1.0
- your server or blade BIOS to latest
version


then this issue should be resolved. All these updates can be found on hp.com.

It is highly advised to perform these updates because there are some conditions that cause server hangs/reboots.


HTH


Kris

[rudokop]

Thank you for your answer.
My server is ml150 g6
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3884324&prodTypeId=15351&prodSeriesId=3884323&swLang=13&taskId=135&swEnvOID=1005
As if I'm looking right there is nothing with version v1.11.1.0 there

[Moderator edit: Removed the broken link. Please refer to https://support.hpe.com/]

[kris rombauts]

you're right, the info i provided was for ml/dl 3xx/5xx and blade blades, sorry.

But you could try to update the system management driver for your model of server or look out for newer version in the future as it seems just new.

Not sure what sensor 11 is in this model of server.

[rudokop]

Is there any way to know what's "Sensor 11" in this server?

[Charles Steinberg]

Did you ever find a solution to this problem?
I also have a ML150G6.

I had issues using the HP CD, in that When some ofthe HP software installed, the machine would not boot. I don't know which ones, as they were rolled into the install.

But I am stuck with this "
Sensor 11 is missing. Reading Flags = 40 "

any ideas are helpful.

[ing. Marco Dalponte]

Same problem on same machine.
I've tried everything but until now no results.
I'll inform you if I succeed.

[LANDRIEU_1]

Exactly the same problem here.
I think i have the latest drivers/firmware.

[rudokop]

no solution found yet

any reaction from HP ?

[rooibos]

I have the same problem on my dl180 G6 and Windows 2008
Sensor 9b is missing. Reading Flags = 40