iLO 4 AlertMail Email Address incorrectly validated

[tigr]

Hi,

I have a Microserver gen8 with ilo firmware 2.10 installed.

I am setting up the Alert Mail under Administration->Management but it is not possible to enter an email addresses in the Alertmail field if it contains more than one period after the @. So you can enter a .com address but not a .co.uk address.

The error seems to be in regular expression used in the inputvalidator.js file.

I can enter a .co.uk email if I use telnet to configure the iLO card.

Anyone else seeing this problem, is it only this firmware? And how can I get it fixed or report it.

Thanks

[Jimmy Vance]

---

@tigr wrote:

Hi,

I have a Microserver gen8 with ilo firmware 2.10 installed.

@I am setting up the Alert Mail under Administration->Management but it is not possible to enter an email addresses in the Alertmail field if it contains more than one period after the @. So you can enter a .com address but not a .co.uk address.

The error seems to be in regular expression used in the inputvalidator.js file.

I can enter a .co.uk email if I use telnet to configure the iLO card.

Anyone else seeing this problem, is it only this firmware? And how can I get it fixed or report it.

Thanks

---

I'll forward this information to the iLO team

[Oscar A. Perez]

Hi, 

This is a known issue with the AlertMail webpage that will be fixed in the next iLO4 release this summer.

The workaround is to use RIBCL script or CLI to configure the email.