ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO Firmware Upgrade Problem

SOLVED
Go to solution
Eric Painley
Occasional Visitor

iLO Firmware Upgrade Problem

I have recently upgraded the iLO Firmware on a ProLiant ML350 G5 using the online firmware flash utility. It successfully upgraded from version 1.81 to 1.82. However I am no longer able to access the remote console. I can see the screen however the mouse and keyboard does not work remotely. Even the Ctrl-Alt-Del button on that window does not work. Do I have to restart the server after the firmware upgrade in order for the keyboard and mouse to function?
2 REPLIES
Solution

Re: iLO Firmware Upgrade Problem

Hi,

All system firmware update or try ilo reset.

Smart Update Firmware DVD 9.0
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&prodNameId=3279711&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-a69a789f6bfc4b0fbe2d84c7c6

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Eric Painley
Occasional Visitor

Re: iLO Firmware Upgrade Problem

Ok thanks! I will try that sometime this week (it is a production server so I obviously cannot restart it any time I feel fit to)