ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO access not working from the machine itself

 
TD-NorNet
Occasional Contributor

iLO access not working from the machine itself

My HP ProLiant DL320 G6 servers have iLO activated, firmware version is 2.15. iLO shares the same Ethernet interface with the server itself, both have of course different IP addresses. It is not possible to e.g. Telnet or HTTPS from the server itself to its iLO machine. The iLO machine simply does not respond, not even to ARP requests. However, accessing iLO from another machine in the network is working.

 

I also tried resetting iLO (hponcfg -r) to factory defaults -> no change.

1 REPLY
Oscar A. Perez
Honored Contributor

Re: iLO access not working from the machine itself

This is a known limitation of the iLO on the shared NIC



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!