HPE Community
ProLiant Servers (ML,DL,SL)
1754021 Members
8237 Online
108811 Solutions
New Discussion юеВ

Re: iLO via SSH sometimes works and sometimes not ...

 
Peter Lorenz
New Member

тАО05-26-2011 01:31 PM

тАО05-26-2011 01:31 PM

iLO via SSH sometimes works and sometimes not ...

Hello, I'm using iLO v1.94 on a ProLiant DL380 G4. The SSH login attempt often just times out. It'll mostly work again after a waiting period of about 10 to 15 minutes or when the power plug is pulled. Another thing is that a connection via SSH is only possible from inside LAN. A remote connection via forwarded tcp port 22 always times out. The iLO-webinterface does work all of the time and there are no erros in the iLO event Log. Is there something to do about it? Regards and thanks in advance, Peter
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО05-26-2011 01:36 PM

тАО05-26-2011 01:36 PM

Re: iLO via SSH sometimes works and sometimes not ...

Without reading about all the fixes I would first update to the latest version of iLO firmware ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Jimmy Vance
HPE Pro

тАО05-26-2011 05:56 PM

тАО05-26-2011 05:56 PM

Re: iLO via SSH sometimes works and sometimes not ...

I think v1.94 was the last firmware update for the original iLO in the G4.

I suspect there is an issue with the iLO network settings, or a problem with the network itself.
No support by private messages. Please ask the forum! 
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.