cancel
Showing results for 
Search instead for 
Did you mean: 

iLO

Kathy Bowman
Occasional Contributor

iLO

How to enable iLO on HP Protiant dl 380 server
3 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: iLO

hi,

at first send the server model

DL 380 ( generation ).

check this site :

http://h18000.www1.hp.com/products/servers/management/ilobest-practice.html

and here is the manual :

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00257375/c00257375.pdf

mikap
Elko
Frequent Advisor

Re: iLO

Press F8 during boot, it will enter to ilo menu, set up ip address ( or choose DHCP for addresses ) set up username/password
Very likely DHCP is already set up by default,

username is :Administrator
password is ....on sticker/ or attached to server.

After you set up username / ip address/ passwrod point your browser to ip_address you assingned and log in.
/home/BIH/Sarajevo
Elko
Frequent Advisor

Re: iLO

When I say DHCP, you have to have dhcp server in your net to provide ip address for ilo.
/home/BIH/Sarajevo