HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ide boot disk ML330 ATA

 
Tom Walker_3
Occasional Contributor

ide boot disk ML330 ATA

Does anyone know how I can get this box to boot off an IDE drive that is not on the raid controller?
This is an ML330 G3 with dual drives on a built-in ATA raid controller. I don't find an option to boot off anything other than the CD, floppy or raid. I want to install the OS to a separate set of drives that are not on the same controller or disks where the data will be stored.

Tom
2 REPLIES
Sunil Jerath
Honored Contributor

Re: ide boot disk ML330 ATA

Hello Tom,
Unfortunately, you wont be able to accomplish this because of the way the architecture of the system. If someone has a great idea of doing this I would be very interested to know.

Regards,
kamal_9
Super Advisor

Re: ide boot disk ML330 ATA

Hi Tom
Iam not Sure.But you try by pressing esc key after post screen and seen ,when you press esc you can get the available options to boot their you can select ide .and press enter