Hi Hemanath ,
This is mostly due to a wrong boot order configuration set in the BIOS.
If you are trying to install the OS through a USB thumb driver, Go to BIOS
Check, if the USB Boot Support“ is enabled. If not, enable it
Go to „System Options“ > „USB Options“ > „Removable Flash Media Boot Sequence“ and select the proper boot device there.
Then select “Standard Boot Order” (IPL) and choose to start from “USB Drive Key (C:)” first.
Leave the RBSU and restart your server
Regards
Ronny Paul issac
If you feel this was helpful please click the KUDOS! Thumbs below!
