ProLiant Servers (ML,DL,SL)
1748035 Members
4713 Online
108757 Solutions
New Discussion юеВ

Re: individual activity led problem

 
lrd
New Member

individual activity led problem

Hello,

I just bought a HP Proliant ml 150 server and installed windows 2k3 64bit everything seemed fine until I saw that the individual activity leds aren't flickering while the server is working, they only flicker during the POST and for about 3-4 seconds. What software do I need so that they flicker on every read/write etc. operation? I've installed all drivers that came with the cd,. I'm clueless
3 REPLIES 3
James ~ Happy Dude
Honored Contributor

Re: individual activity led problem

Hello,

Refer : http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us
&objectID=c00596191&jumpid=reg_R1002_USEN

There is nothing wrong with the hardware. This is by design.

PS : Y do you want the LEDs to flicker on every read/write operation ?

James.
lrd
New Member

Re: individual activity led problem

Yes, I want to see how my harddisks are working. On my other server (proliant ml 350 with e200 controller) there is an option to identify each disk and also the controller reports when there is problem with one of the drives and also each read/write operation is "displayed" on the led. I expect this to work in the same way the ml 150 server.
James ~ Happy Dude
Honored Contributor

Re: individual activity led problem

Hello,
I dont think that option is available with 100 series servers.(low cost server with many less features).

Please, Let us know if u get this working !

James.