ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

installation problem Red hat 9 proliant ml350 g3

Ranu Castañeda
Occasional Visitor

installation problem Red hat 9 proliant ml350 g3

Hello i have a server proliant ml350 g3 and i install red hat 9 according with the solution give for us using the bootdisk . The installation was successful until red hat reboot the server to finish it. Then i obtain this message:

hda:set_drive_speed_status: status=0x51 {DriveReady Seekcomplete Error}
hda:set_drive_speed_status:error 0x04
mount:error 6 mounting ext3
umount /initrd/proc failed:2
kernel panic:No init found.Try passing init= option to kernel

i dont know what to do.please help me
thanks in advance
Honored Contributor

Re: installation problem Red hat 9 proliant ml350 g3

Set the following options in the RBSU:

Select the F9 prompt during POST to enter the RBSU:
From the Main Menu, select Advanced Options
From the Advanced Options menu, select Hyper-Threading.
Select Disable

Also, Disable the MPS Table Mode

After the install completes, you can turn these back on and install the Multi-Processor Kernel.
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: