HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

kernel power

 
aorr1antia
Occasional Contributor

kernel power

The server has rebooted four times twice a year, it's Proliant ML310eGen8v2, i have no smart array.  The server manger software (windows server 2008R2) says:

The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Do I have to install a patch o a new driver ?.

1 REPLY
Edwin Eppel
Valued Contributor

Re: kernel power

  • If the system is not connected to a backup power supply, then it should be, preferably with power conditioning (for brown outs and over-voltage situations).
  • Connect to Windows Update and make sure all updates have been applied.
  • Check for newer drivers and firmware for your hardware (latest SPP - Service Pack for Proliant).
  • Check the system logs for error conditions..