ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

losing access to ILO dashboard after power of the server , I can't power on the server remotely

srini_
Occasional Visitor

losing access to ILO dashboard after power of the server , I can't power on the server remotely

We have HP ProLiant ML10v2 servers (Product Name: HP ProLiant ML10v2), we have configured the ILO 4, I can access the ILO dashboard, but after I power of the server from power management tab in dashboard I am losing access the dashboard. That is the not case, we should be able to power on the server remotely, right?

That's not happening somebody physically needs to start that server. We tried updating the firmware to latest version still facing the same problem. Any help debugging this issue?

2 REPLIES
srini_
Occasional Visitor

Re: losing access to ILO dashboard after power of the server , I can't power on the server remotely

HP servers that are shipped with shared ILO nic don't support remote power on future. when we shutdown the server ILO nic also lose the power completely. You need to have a server that has dedicated ILO nic in order to get the remote power on future.

Jimmy Vance
HPE Pro

Re: losing access to ILO dashboard after power of the server , I can't power on the server remotely


srini_ wrote:

HP servers that are shipped with shared ILO nic don't support remote power on future. when we shutdown the server ILO nic also lose the power completely. You need to have a server that has dedicated ILO nic in order to get the remote power on future.


While I can't speak to the ML10v2 or some of the other basic entry level systems as I don't have access to them. Your  blanket statement about iLO shared NIC systems is incorrect for the majority of ProLiant servers.  




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!