may I mix SAS 15k drives and SSD SATA on a Gen10 with P408i controller

[Dominix_]

Hi everyone, 

may I mix 3 SAS 15k drives and 5 SSD SATA on a Gen10 with P408i controller on one disk magazin  ? 

I know there must be 2 separate Array, one for each type of disk, it might be a RAID5 for SAS and a RAID6 for SATA SSD.

I would like a confirmation to provision a some servers. thank for your advice.

[Raviswamy · Accepted solution]

https://h20195.www2.hpe.com/v2/GetPDF.aspx/a00008203enw.pdf

HPE Smart Array P408i-a SR Gen10 Controller  Storage interface (SAS/SATA)
8 SAS lanes across 2 x4 internal Mini-SAS ports
12Gb/s SAS, 6Gb/s SATA technology
Mix-and-match SAS and SATA drives to the same controller

The controller supports by default as above.

Regard

Ravi swamy