ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

memory problems on proliant 1000

kerrigan
Occasional Advisor

memory problems on proliant 1000

I keep getting 00F00004 00 -system board memory
201 memory error (run test)
run diagnostics

01000004 00 -system board memory
201 memory error (run test)
run diagnostics

00F00000 01 -system board memory
203 memory addresss error


then i load scu and i start the system configure and then i start the hardware configuration and it displays an error of a small blue screen which says
exception 2
aix=001 bx=0020 cx=0068 dx=0068 sp=0000 bp=029c si=0000 di-05e6 ds=0010 es=0029 ss=0004 cs-0100 ip=0129 flags=3046 then it stalls and i have to reboot after a while the memmory problems go away and i boot into dos 6.22 .
but before dos starts i get a msg parity check 2 system board memory


i found out through the scu and diags that i have a pentuim based 60 Mhz system
it has 16 meg of onboard memmory

is there any way to disable the system memmory
2 REPLIES
SAKET_5
Honored Contributor

Re: memory problems on proliant 1000

Hi there,

I would have thought that it is a case of replacement of the motherboard. Have you logged a call with HP about this?

Regards,
Shaikh Imran
Honored Contributor

Re: memory problems on proliant 1000

Hi,
I would advise you not to try that and better log a call with your support vendor as this seems to be a pure hardware problem and you maybe taking risk by doing a workaround.


Regards
I'll sleep when i am dead.