HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

memory upgrade problem ml110 g7

 
sphere73
Occasional Visitor

memory upgrade problem ml110 g7

I have an HP Proliant ML110 G7 server running with only 2Gb RAM installed. The RAM presently in the system is Samsung 2GB PC3-10600E i want to upgrade to 8 Gb, i 've just bought exactly the same RAM as is already installed however when i insert the new modules, the server beep and doesn't start!!!

I' ve tested the single ram and it's ok....but when i try to install more than one module...the server doesn't start!

(obviously respecting the populating list)

I've already updated the bios of server to the latest realese....

Please could anyone offer advice as to what i could try next?

Thank you

Fabio

1 REPLY
Vktor
Frequent Advisor

Re: memory upgrade problem ml110 g7

Hi pull out this module of 2GB. And by two same  Unbuffered  ECC DIMMs of 2x4GB capacity.

500672-S21

Best Regards.

If you feel this was helpful please click the KUDOS! thumb below!