ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

message 306 upgrade to lightsout 100 BMC FW 3.10

carlwhi
Occasional Contributor

message 306 upgrade to lightsout 100 BMC FW 3.10

Good Afternoon,

 

I have a Proliant ML150 G5.Runs Win 2008 R2. I did an upgrade, under the heading

 

 

** CRITICAL ** Online ROM Flash Component for Windows - HP ProLiant ML150 G5 Servers

 

That required me to download and run an exe called cp014211.exe. That ran with no problems or error messages, and then asked me to reboot. So far so good.

 

On reboot, I get the message

 

306 - please upgrade to lightsout 100 BMC FW 3.10 or higher

Press F1 to continue.

 

Did that (pressed F1).

 

Now all i get is 

 

Boot Fail!

Please insert Boot Media in selected Boot device .....

 

and that goes on, repeating every 5-7 seconds, until i cut the power.

 

 

Question, how do i get BMC FW 3.10 or higher - i can't see it on the ML150 G5 support pages. And then when i do, how do i upgrade when i can't seem to get back to my boot drive. It was working fine before the run of cp014211.

 

All help gratefully accepted, and thank you in advance.

 

Thank you,

Carl.

2 REPLIES
Suman_1978
HPE Pro

Re: message 306 upgrade to lightsout 100 BMC FW 3.10

Hi,

 

Get the FW here, read the installation instructions.

 

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

PomidorOFF
Occasional Visitor

Re: message 306 upgrade to lightsout 100 BMC FW 3.10

The link is outdated. Where to download the updated FW?

 

http://h20565.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_2cdadd5df9b84d1ab3b196597d&lang=en-us&cc=us#tab3

FW installed, all worked fine!