mezzanine card Raid Management Software.

[Prashant (I am Back)]

Hi all,

Any one ever used this mezzanine card. I am using this on bl35p
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00368956&jumpid=reg_R1002_USEN
Two NC7781 PCI-X Gigabit NICs (on a mezzanine card)
382850-B21


I am looking for RAID Mager software that will help me rebuild the Failed raid and inform SIM about it.

I am have used LSI My Storage it will not help to rebuild.
second i have used new SAS notification driver from HP but still that is not working as it failed ot installed onthe server.

Any one have clue on that.
Prashant s.

[raadek]

Prashant,

I am not following you.

You reffer to a NIC mezzanine card, which is standard on all BL35p models (with the exception of Factory Integrated Models which are US-specific). Hence most of the people having any BL35p use this, unless they upgrade to Multifunction NIC 384043-B21.

But what does it have to do with RAID management?

Rgds.

[Prashant (I am Back)]

Hi,

what i have is LSI Adapter SAS 3000 Series 4 port(1064). That is basically fixed on top of the Nic module.

what i am looking for a solution where i am rebuild raid online. Offline we can do it. Online i am not able to find any software for same.

Prashant S.

[Prashant (I am Back)]

Hi all

Is there any proess for rebuilding from Windows in SAS controller?

Prashant S.

[Prashant (I am Back)]

Hi,

What i am able to find is there is no software from HP for monitoring the SAS controller and ACU will not work with it.

So no rebuilding online option.
LSI can give utility that show you rebuilding %

Rebuilding is auto after failed drive is replaced. Or manuel process is under BIOS LSI utility to Syn HDD.

Prashant S.

[Prashant (I am Back)]

Hi,

What i am able to find is there is no software from HP for monitoring the SAS controller and ACU will not work with it.

So no rebuilding online option.
LSI can give utility that show you rebuilding %

Rebuilding is auto after failed drive is replaced. Or manuel process is under BIOS LSI utility to Syn HDD.

Prashant S.