- Community Home
- >
- Servers and Operating Systems
- >
- HPE ProLiant
- >
- ProLiant Servers (ML,DL,SL)
- >
- Re: ml 110 G2 SATA raid 1 disk failure
ProLiant Servers (ML,DL,SL)
1753797
Members
9093
Online
108805
Solutions
Forums
Categories
Company
Local Language
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-29-2009 03:33 AM
07-29-2009 03:33 AM
ml 110 G2 SATA raid 1 disk failure
Hello,
after some power failure, my server could not boot.. stop after windows logo...
i've done a check through raid array utility and it said 1st disk was defective...
what should i do? just open the server and change the failing disk? with a disk of the same model as the currentone? then rebuild the array??
can i just take the failling disk off? and would the server accept to boot with only one disk.. for the time i buy a new disk?
after some power failure, my server could not boot.. stop after windows logo...
i've done a check through raid array utility and it said 1st disk was defective...
what should i do? just open the server and change the failing disk? with a disk of the same model as the currentone? then rebuild the array??
can i just take the failling disk off? and would the server accept to boot with only one disk.. for the time i buy a new disk?
1 REPLY 1
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-28-2009 12:29 AM
08-28-2009 12:29 AM
Re: ml 110 G2 SATA raid 1 disk failure
Hello,
You should buy a new disk. However the server should be able to boot up if only 1 disk is broken. I assume you had raid 1. You might have more issues with this servers. I would also recommend reseating parts, check dimms/cpu with offline diagnostics. Try the new disk and see if it rebuilds. You might have damaged the first HDD as well. If everything looks green and windows still freezes i would try a reinstall of OS
You should buy a new disk. However the server should be able to boot up if only 1 disk is broken. I assume you had raid 1. You might have more issues with this servers. I would also recommend reseating parts, check dimms/cpu with offline diagnostics. Try the new disk and see if it rebuilds. You might have damaged the first HDD as well. If everything looks green and windows still freezes i would try a reinstall of OS
The difference between ordinary and extraordinary, is that little extra.
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP