HPE Community
ProLiant Servers (ML,DL,SL)
1752567 Members
5006 Online
108788 Solutions
New Discussion юеВ

ml 330 server - trouble with new added ide drives

 
SOLVED
Go to solution
Andrea Ferretti
New Member

тАО03-06-2005 09:17 PM

тАО03-06-2005 09:17 PM

ml 330 server - trouble with new added ide drives

after having added two new 80 Gb drives to a SCSI ML330 server, the ide drives size is not reported correctly (16 Gb insteas of 80).
Any suggestion?
0 Kudos
3 REPLIES 3
Oleg Koroz
Honored Contributor

тАО03-07-2005 12:34 AM

тАО03-07-2005 12:34 AM

Re: ml 330 server - trouble with new added ide drives

Verify: CS settings and latest System ROM, if drives are third party not guaranteed; depend from brand
Part number for 80GB 287685-001
0 Kudos
e4services
Honored Contributor

тАО03-08-2005 01:18 AM

тАО03-08-2005 01:18 AM

Solution

Re: ml 330 server - trouble with new added ide drives

Are you sure the ML330 supports IDE hard drives? The older server's onboard IDE controllers often did not have the firmware to support complex IDE drives. We often add a new, good quality IDE controller to these servers to provide modern LBA drive support
Hot Swap Hard Drives
0 Kudos
Andrea Ferretti
New Member

тАО03-18-2005 08:57 AM

тАО03-18-2005 08:57 AM

Re: ml 330 server - trouble with new added ide drives

CS settings have not been able to solve the issue. We have installed a new IDE controller.
thank you
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.