cancel
Showing results for 
Search instead for 
Did you mean: 

ml 350 g4p

 
sujeet_3
Occasional Contributor

ml 350 g4p

hello,

my server config. is ML350g4p server having onboard lsi 53c1030 fusion mpt controller and having lite-on dvd writer when i connect my dvd then my scsi controller gives error bus master error when i disconnect this then scsi controller works fine.

pl help me out



sujeet
4 REPLIES
Oleg Koroz
Honored Contributor

Re: ml 350 g4p

lite-on dvd writer ???? SCSI Interface?? Where you connect it?

On board SCSI controller designed to support U320 Devices..

Where you connect DVD to IDE, same cable as CD ROM? If Yes than use Cable Select Jumper CS
sujeet_3
Occasional Contributor

Re: ml 350 g4p

dvd writer is ide and select cs also but still giving problem.
Oleg Koroz
Honored Contributor

Re: ml 350 g4p

Is any device connected to On board SCSI? Or SCSI cable without Devices?

1. Can you update system ROM?
2. After Clear NVRAM
3. Is there any Additional Card in the PCI slots or any USB, External .. etc Devices connected ?
4. If don't use at all On board SCSI Go to F9 and disable it from PCI devices.
Oleg Koroz
Honored Contributor

Re: ml 350 g4p

Can you type exactly error message?
Can you still boot after message show up or it hung?


http://h18023.www1.hp.com/support/files/server/us/index.html