ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ml110 g5 mobo change

denismou
Occasional Contributor

ml110 g5 mobo change

I have a ml110 g5 server with four sata disks in raid1 configuration (two volumes) using the embedded sata controller. Motherboard is gone. I have ordered a replacement motherboard. My question is how to reimplement the raid configuration on the new motherboard. I have a spare ml110 g5 in my office and I have made several tests wiht some other random disks with no luck

 

Thanks

3 REPLIES
Torsten.
Acclaimed Contributor

Re: ml110 g5 mobo change

AFAIR you need to go into BIOS and set the controller mode to RAID mode.

 

Example:

 

sata-mode-IDE-RAID.png


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
denismou
Occasional Contributor

Re: ml110 g5 mobo change

Thank you for your reply. I did so on the test machine but when I select the disks and create the array in the raid configuration utility I loose data. I need to reimplement the raid configuration on the new mobo without reinitialising the disks 

Torsten.
Acclaimed Contributor

Re: ml110 g5 mobo change

Just switch to raid mode and boot. This should work. Don't create a new RAID!


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!