ml310 G5 server error

[Daltron]

hi,
i have a Ml 310G5 server, with the following error:
1719-slot 5 drive array .a controller failure event occurred prior to this power up.
the server was restarting and crashed a few weeks ago. Since than we have replaced the backplane and scsi cable. Just Last week we replaced the motherboard. Afer replacing the motherboard this error came up.
Any solutions on how to fix this..
Thanks,
Dal

[Erdogan Temur · Accepted solution]

Hi,

1719 Error Message Error

1719-Slot z Drive Array - A controller failure event occurred prior to this power-up (previous lock-up code = 0x####)
Audible Beeps: None
Possible Cause: A controller failure event occurred before the server powered up.
Action: Install the latest version of controller firmware. If the condition persists, then replace the controller.

Ps:system hardware update with Smart Update Firmware DVD 9.00

That will also fix the problem :) Remember to assign points to answers that helped in your problem. So the forum stays alive...