HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ml310 G5 server error

 
SOLVED
Go to solution
Daltron
Occasional Visitor

ml310 G5 server error

hi,
i have a Ml 310G5 server, with the following error:
1719-slot 5 drive array .a controller failure event occurred prior to this power up.
the server was restarting and crashed a few weeks ago. Since than we have replaced the backplane and scsi cable. Just Last week we replaced the motherboard. Afer replacing the motherboard this error came up.
Any solutions on how to fix this..
Thanks,
Dal

1 REPLY
Solution

Re: ml310 G5 server error

Hi,

1719 Error Message Error

1719-Slot z Drive Array - A controller failure event occurred prior to this power-up (previous lock-up code = 0x####)
Audible Beeps: None
Possible Cause: A controller failure event occurred before the server powered up.
Action: Install the latest version of controller firmware. If the condition persists, then replace the controller.

Ps:system hardware update with Smart Update Firmware DVD 9.00

That will also fix the problem :) Remember to assign points to answers that helped in your problem. So the forum stays alive...
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.